5 Axis Machining Center

AX-320 / 450
5 Axis Machining Center AX-320/450
  • Specification
  • Standard Accessories
  • Options
Model Description AX-320 AX-450
Table Table size Dia. 320 mm (12.6") Dia. 450 mm (17.72")
Travel ranges (X/Y/Z) 660 x 610 x 610 mm
(25.98x24.02x24.02")
760 x 610 x 560 mm
(29.92x24.02x22.05")
T slot size 12 mm x 90°
(0.47" x 90°)
14 mm x 45°
(0.55" x 45°)
Max. table load 150 / 150 kgs 300 / 250 kgs
Max. workpiece size(WxH) Dia. 420 x 300 mm
(16.54 x 11.81")
Dia. 600 x 300 mm
(23.62 x 11.81")
Diameter of table hole 50 mm (1.97") 171 mm (6.73")
Spindle nose to table surface 50 ~ 605 mm
(1.97 ~ 23.82")
50 ~ 565 mm
(1.97 ~ 22.24")
A axis, tilt(deg) / (0.001°) 150° (-120° / +30°) 220° (±110°)
C axis, rotary(deg) / (0.001°) 360°
Spindle Tool shank & pull stud ISO 40
Spindle inner diameter 70 mm (2.76")
Spindle speed direct drive 10000 rpm
Spindle speed built-in 15000 rpm
Main motor (con/30min) 9 / 12 kW
Axis Servo Motor Rapid feed rate (X/Y/Z) 30 / 30 / 24 M/min.
Feed rate (X/Y/Z) 10000 mm/min.
Feed rate (A/C) 5.5 / 11.5 rev/min.
X axis rated torque 10 Nm
Y axis rated torque 10 Nm
Z axis rated torque 10 Nm
A axis rated torque 5 Nm 10 Nm
C axis rated torque 3.8 Nm 10 Nm
Auto Tool Changer ATC type DISK / CHAIN (Opt.)
CAM type ARM
Tool selection (Bi-direction) RANDOM
Tool storage capacity 24 pcs / 30, 40 pcs(Opt.)
Max. tool diameter 90 mm (3.54") / 76 mm (2.99") (Opt.)
Max. tool Length 300
Max. tool weight 8
Miscellaneous Air requirement 6 kg/cm2
Hydraulic requirement 40 kg/cm2, 30 L
Power requirement 40 KVA
Coolant tank capacity 300 L
Machine weight 6500 kgs 7000 kgs
Machine height 2900 mm (114.17")
Floor space (LxW) 2660 x 2230 mm
(104.72 x 87.8")
3100 x 2230 mm
(122.05 x 87.8")
Packing size (LxWxH) 2660x2230x2560mm
(104.72x87.8x100.79")
3100x2230x2560 mm
(122.05x87.8x100.79")

*The Specifications are subject to change without prior notice.

  • 24 tools arm type ATC 
  • Spindle oil chiller
  • Cutting air blower
  • Coolant & auto lubrication system
  • Full splash guard
  • Telescope steel cover
  • Z axis pneumatic balance system
  • Hollow ball screws with cooling system
  • Heat exchanger for electrical cabinet
  • Encoder for A/C axes (AX series)
  • Encoder for B/C axes (BX series)
  • Rigid tapping
  • Remote MPG
  • RS-232 interface
  • Operation status light
  • Work light
  • Tool box & tools
  • Leveling bolts & pads
  • Operation & program manuals
  • Coolant through spindle
  • Chip conveyor
  • 3 axes linear scales
  • Auto tool length measurement
  • Auto workpiece measurement
  • Transfomer
  • CE mark