Heavy Duty CNC Lathe

Flat Bed
FA45N / 50N / 55N / 60N / 70N / 80N / 100N
FA-N Series CNC Heavy Duty Flat Bed Lathes
  • Specification
  • Standard Accessories
  • Options
Model Description FA45N FA50N FA55N
Capacity Swing over bed 1170 mm (46”) 1300 mm (51") 1430 mm (56")
Swing over cross slide
(Half length)
845 mm (33.2”) 965 mm (38") 1090 mm (42.9")
Swing over cross slide
(Full length)
720 mm (28.3”) 850 mm (33.5") 980 mm (38.6")
Center height 585 mm (23”) 650 mm (25.6") 715 mm (28.1")
Distance between center 2150 mm (84.6")~14150 mm (557")
Bed width 1020 mm (40")
Width of cross slide 420 mm (16.5")
Width of carriage 950 mm (37.4")
Spindle Spindle nose A2-11 (6”) / A2-15 (9”) / A2-20 (12”,14.5”) – FA45N~ FA1000N
A2-28 (16”) – FA55N ~ FA100N
A2-28 (21”) – FA60N ~ FA100N
Spindle
speeds
A2-11 153mm (6”) 9~600 rpm ( OPT:12~800 rpm )
A2-15 230mm (9”) 9~450 rpm ( OPT:12~600 rpm )
A2-20 305mm (12”) 9~400 rpm
A2-20 369mm (14”) 9~300 rpm
A2-28 408mm (16”) - 6~250 rpm
A2-28 534mm (21”) - - 6~220 rpm
Spindle center MT6
Turret Turret H4-450 Servo or V8 Hydraulic
Tool Size 32×32 mm (1.25”)
X axis travel
Standard (Half length cross slide)
600 mm (23.6")
X axis travel
(Full length cross slide)
900 mm (35.4")
Z axis travel 2150 mm (45.3") ~ 14150 mm (557")
X axis rapid travel ,Ball screw dia. 6M / min, Ø 40 mm x P5
Z axis rapid travel ,Ball screw dia. 6M / min,1~5M (Ø 63 mm x P10) 5M / min, 6~7 M (Ø 80 mm x P10)
5M / min, 8~14M (Rack & Pinion Driver)
Tailstock Tailstock quill diameter 250mm (9.84") Opt: 350 mm (13.7”)
Tailstock quill travel 250mm (9.84")
Tailstock Center MT6
Motor X axis servo motor FANUC αi22 4 kw
Z axis servo motor 2~3M FANUC αi22 :4 kw; 4~7M FANUC αi22 4 kw (Gear Box)
8~14M FANUC αi40 6 kw (Rack & Pinion Driver)
Spindle motor FANUC α30 30/37kw(40 / 50 HP)
Lubricant pump motor 25 W
Coolant pump motor 1.2 kw
Hydraulic pump motor 2.25 kw
Machine weight 2000mm center distance 17500 kgs 18000 kgs 18600 kgs
Each extra 1000 mm weight 1500 kgs
Model Description FA60N FA70N FA80N FA100N
Capacity Swing over bed 1560 mm (61") 1800 mm (70") 2050 mm (80") 2500 mm (100.3")
Swing over cross slide
(Half length)
1215 mm (47.8") 1465 mm (57.6") 1715 mm (67.5") 2215 mm (87.2")
Swing over cross slide
(Full length)
1110 mm (43.7") 1370 mm (53.9") 1630 mm (64.1") 2150 mm (84.6")
Center height 780 mm (30.7") 910 mm (35.8") 1040 mm (40.9") 1250 mm (49.2")
Distance between center 2150 ~ 14150 mm (84”) ~ (557”)
Bed width 1020 mm (40")
Width of cross slide 420 mm (16.5")
Width of carriage 950 mm (37.4")
Spindle Spindle nose A2-11 (6”) / A2-15 (9”) / A2-20 (12”,14.5”) – FA45N~ FA100N
A2-28 (16”) – FA55N ~ FA100N
A2-28 (21”) – FA60N ~ FA100N
Spindle
speeds
A2-11 153mm (6”) 9~600 rpm ( OPT:12~800 rpm )
A2-15 230mm (9”) 9~450 rpm ( OPT:12~600 rpm )
A2-20 305mm (12”) 9~400 rpm
A2-20 369mm (14”) 9~300 rpm
A2-28 408mm (16”) 6~250 rpm
A2-28 534mm (21”) 6~220 rpm
Spindle center MT6
Turret Turret H4-450 Servo or V8 Hydraulic
Tool Size 32×32 mm (1.25”)
X axis travel
Standard (Half length cross slide)
600 mm (23.6")
X axis travel
(Full length cross slide)
900 mm (35.4")
Z axis travel 2150 mm (45.3") ~ 14150 mm (557")
X axis rapid travel ,Ball screw dia. 6M / min, Ø 40 mm x P5
Z axis rapid travel ,Ball screw dia. 6M / min,1~5M (Ø 63 mm x P10) 5M / min, 6~7M (Ø 80 mm x P10)
5M / min, 8~14M (Rack & Pinion Driver)
Tailstock Tailstock quill diameter 250 mm (9.84") Opt: 350 mm (13.7”)
Tailstock quill travel 250 mm (9.84")
Tailstock Center MT6
Motor X axis servo motor FANUC αi22 4 kw
Z axis servo motor 2~3M FANUC αi22 :4 kw; 4~7M FANUC αi22 4 kw (Gear Box)
8~14M FANUC αi40 6 kw (Rack & Pinion Driver)
Spindle motor FANUC αi30 30/37kw (40 / 50 HP)
Lubricant pump motor 25 W
Coolant pump motor 1.2 kw
Hydraulic pump motor 2.25 kw
Machine weight 2000mm center distance 19200 kgs 20400 kgs 21600 kgs 25500 kgs
Each extra 1000 mm weight 1500 kgs

*The Specifications are subject to change without prior notice.

  • Fanuc control, motor & 6" spindle bore (FA), 9" (FB)
  • Spindle oil chiller
  • H4 or V8 hydraulic turret
  • Auto coolant, hydraulic & lubrication system
  • Splash guard
  • Center, MT6 for tailstock
  • Work light
  • Hydraulic tailstock with rotating quill
  • Chip conveyors (chain type for front & rear)
  • Extra spindle bore, motor & speeds
  • Chuck, Rear chuck adapter & Face plate
  • C axis or spindle 5° indexing or 15° orientation
  • Driving tool turret
  • Driving toolholders
  • Special boring bar toolholder
  • Higher coolant pressure
  • Twin turret
  • Tool presetter
  • Other controller
  • Transformer (power supply except 220V)
  • Steady rest & follow rest (Capacity, Hydraulic or Manual)
  • Heavy duty milling attachment
  • Y axis (with heavy duty milling attachment)
  • Grinding head on turret or cross slide
  • CE mark