CNC Heavy Turning Lathe

Flat Bed
FB70N / 80N / 90N / 100N
Heavy Duty CNC Lathe-FB70N/80N/90N/100N
  • Specification
  • Standard Accessories
  • Options
Model Description FB70N FB80N FB90N FB100N
Capacity Swing over bed 1800 mm (70.86") 2000 mm (78.74") 2250 mm (88.58") 2500 mm (98.4")
Swing over cross slide
(Full length)
1240 mm (48.8”) 1440 mm (56.6”) 1690 mm (66.5”) 1940 mm (76.3”)
Swing over cross slide
(Half length)
1325 mm (52.1”) 1510 mm (59.4”) 1745 mm (68.7”) 1985 mm (78.1”)
Center height 900 mm (35.4") 1000 mm (39.37") 1125 mm (44.2") 1250 mm (49.2")
Distance between center 3000 mm (120") ~12000 mm (480")
Bed width 1345 mm (52.9")/1575(62")
Spindle Speed/Bore/Nose 4 Steps 5 ~ 460 rpm / Ø 230 mm (9”) / A2-15
Opt. 4 Steps 4 - 300 rpm / Ø 260 mm (10.2”) / A2-20
Turret Turret H4 or V8
Tool Size H4: 50 x 50 mm V8: 32 × 32 mm
X/Z axis travel
Standard (Full length)
cross slide
1250 mm (49.2") / 2600 ~ 11600 mm (102.36”~456.69”)
X/Z axis travel
(Half length) cross slide
720 mm (28.35") / 3000 ~ 12000 mm (118.11”~472.44”)
X axis rapid travel ,Ball
screw dia.
5M / min, Ø 50 mm (1:2 Gear Box)
Z axis rapid travel ,Ball
screw dia.
5M / min 3~4M (Ø 80 mm) 5~6M (Ø100 mm) 7~12M (Rack & Pinion Driver)
Tailstock Tailstock quill diameter 290 mm (11.4")
Tailstock quill travel 300 mm (11.8")
Tailstock Center MT 7
Motor X axis servo motor FANUC αiF22 4 kw
Z axis servo motor FANUC αiF30 7.0 kw
Spindle motor FANUC αil50 45 / 55 kw
Coolant pump motor 1 kw
Hydraulic pump motor 7.5 kw
Machine weight 3000mm center distance 33000 kgs 34500 kgs 36000 kgs 37000 kgs
Each extra 1000 mm
weight
4500 kgs

*The Specifications are subject to change without prior notice.

  • Fanuc control, motor & 6" spindle bore (FA), 9" (FB)
  • Spindle oil chiller
  • H4 or V8 hydraulic turret
  • Auto coolant, hydraulic & lubrication system
  • Splash guard
  • Center, MT6 for tailstock
  • Work light
  • Hydraulic tailstock with rotating quill
  • Chip conveyors (chain type for front & rear)
  • Extra spindle bore, motor & speeds
  • Chuck, Rear chuck adapter & Face plate
  • C axis or spindle 5° indexing or 15° orientation
  • Driving tool turret
  • Driving toolholders
  • Special boring bar toolholder
  • Higher coolant pressure
  • Twin turret
  • Tool presetter
  • Other controller
  • Transformer (power supply except 220V)
  • Steady rest & follow rest (Capacity, Hydraulic or Manual)
  • Heavy duty milling attachment
  • Y axis (with heavy duty milling attachment)
  • Grinding head on turret or cross slide
  • CE mark