CNC Heavy Duty Flat Bed Lathe

LC30 / 35 / 40 / 45 / 50
Heavy Duty CNC Lathe-LC30/35/40
  • Specification
  • Standard Accessories
  • Options
Model Description LC 30 LC 35 LC 40 LC 45 LC 50
Capacity Swing over Bed 770 mm (30") 895 mm (35") 1020 mm (40") 1145 mm (45") 1265mm (50”)
Swing over cross slide 350 mm (13.8") 480 mm (18.9") 610 mm (24") 735 mm (28.9") 860 mm (33.8”)
Center height 390 mm (15.3") 455 mm (18") 520 mm (20.5") 585 mm (23") 635 mm (25")
Distance between centers 1200 (47.2") / 2200 (66.6") / 3200 (126") /4200 (165.4")
5200 (204.7") / 6200 (244.1") / 7200 (283.5") / 8200mm (322.8")
Bed width / Auxiliary guide 560 mm (22") / 700 mm (27.56”)
Spindle Spindle
speeds
Spindle nose -
A2-11(6") 11~600 rpm ( Opt. 12~800 rpm)
A2-15(9") 11~450 rpm ( Opt. 12~600 rpm)
A2-20(12",14.5") 11~400 rpm (12"), 11~300 rpm (14.5")
A2-28 (16”) -
A2-28 (21”) -
Spindle center MT6
Width of cross slide 380 mm (15")
Width of carriage 885 mm (34.8")
Turret Turret H4-250 or V8 Hydraulic
Tool size H4 32x32 or V8 32x32 ; Ø50
X axis Travel 530 mm (20.9") 630mm (24.8”)
Z axis Travel 1200 mm (47.2") ~ 8200 mm (322.8")
X axis rapid travel,
Ball screw dia.
6 M / min (Ø 40 mm * p5)
Z axis rapid travel,
Ball screw dia.
6 M / min, 1M ~ 5M (Ø  63 mm * p10),
6 M ~ 7M (Ø 80 mm * P10 ), 8M ~ 10M (Rack & Pinion Driver)
Tailstock Quill diameter Ø 185 mm (7.3") Rotating quill Opt: 250 mm (9.8") / 350 mm (13.7")
Quill travel 250 mm (9.84")
Quill taper MT6
Motor X axis servo motor FANUC α22ì 4 kw
Z axis servo motor 1-4M FANUC αiF22 4 kw, 5-7M FANUC αiF22 4 kw (Gear box)
8-10M αiF40 6 kw (Rack and Pinion Driver)
Spindle motor FANUC α18i 18.5/22 kw
(Opt. 22 / 26 kw, 30 / 37 kw, 37 / 45 kw)
Lubricant pump motor 25 W
Coolant pump motor 0.845 kw
Hydraulic pump motor 2.25 kw
Machine
Weight
1000mm center distance 9700 kgs 10100 kgs 10500 kgs 10900 kgs 11300 kgs
Each extra 1000mm weight 1000 kgs

*The Specifications are subject to change without prior notice.

  • Fanuc control & motors
  • H4 or V8 hydraulic turret
  • Auto coolant, hydraulic & lubrication system
  • Box way on cross slide
  • Splash guard
  • 6" spindle bore
  • Work light
  • Hydraulic tailstock with rotating quill
  • Tool box with tools
  • Chip conveyors (auger for front & chain for rear)
  • Extra spindle bore, motor & speeds
  • Spindle oil chiller
  • Chucks, Rear chuck adapter & Face plate
  • C axis or Spindle 5° indexing or 15° orientation
  • Driving tool turret
  • Special boring bar toolholder
  • Higher coolant pressure
  • Twin turret (V8 front +H4 rear)
  • Tool presetter
  • Other controller
  • Steady rest & follow rest (Capacity, Hydraulic or Manual)
  • Steady rest with cutting pass through equipment
  • Heavy duty milling attachment
  • Y axis (with heavy duty milling attachment)
  • Grinding head on turret or cross slide
  • Chain type chip conveyor for front
  • Extra tailstock quill dia. 250mm/350mm (A2-8)
  • Transformer (power supply except 220V)
  • CE mark