Conventional Precision Lathes

Heavy Duty
TK960 / 1060 / 1200/ 1200N / 1400N / TK1600N
Conventional Lathe-TK960 / 1060 / 1200/ 1200N / 1400N / TK1600N
  • Specification
  • Standard Accessories
  • Options
Model TK 960 TK 1060 TK 1200

Capacity

 

Swing over bed 960 mm (37.7") 1060 mm (41.7") 1200 mm (47.2")
Swing over cross slide 650 mm (25.5") 750 mm (29.5") 890 mm (35")
Swing over gap 1510 mm (59.4") 1610 mm (63.3") 1750 mm (68.8")
Center height 480 mm (18.8") 530 mm (20.8") 600 mm (23.6")
Width of gap 570 mm (22.4")
Bed width / Auxiliary guide 560 mm (22") / 660 mm (25.9")
Between centers 2M, 3M, 4M, 5M, 6M, 7M,8M,9M,10M
Headstock Spindle bore,dia. Ø 156 mm (6")
[Opt. 230 mm (9") ]
Ø 156 mm (6")
[Opt. Ø 230 mm (9") , Ø 310 mm (12" )
Ø 360 mm (14") ] 
Spindle nose A2-11 [Opt. A2-15] A2-11
[Opt. A2-15, A2-20, A2-20]
Spindle speeds (rpm), 12steps 9-600 [Opt. 6-400] 9-600
[Opt. 6-400, 5-300, 5-300]
Main spindle motor 20 HP (Opt. 25HP or 30HP)
Feed & Threads Cross travel 540 mm  (21.2")
Cross feeds 0.065-0.96 mm / rev (48 kinds)
Longitudinal feeds 0.13-1.92 mm / rev (48 kinds)
Lead screw diameter Ø 50 mm (1.9") x 2TPI
Threading range, Metric 2-30 mm / pitch (44 kinds)
Threading range, Inch 1-15 TPI (48 kinds)
Module pitch threads 1-15 M (32 kinds)
DP. Pitch threads 2-30 P (48 kinds)
Compound rest travel 300 mm (11.8")
Tool size 40 x40 mm (1.5 x1.5")
Rapid motor 1/2HP
Tailstock Quill Diameter Ø 140 mm (5.5") [Opt. bigger quill Diameter]
Center taper MT6
Quill travel 300 mm (11.8")
Miscellaneous Coolant pump 1/4 HP
Net Weight, Kgs 5650 (2M), 6100 (3M), 7450 (4M),
8550 (5M), 9650 (6M),10750 (7M),
11850 (8M),12950 (9M),14050 (10M)
Model TK 1200N TK 1400N

Capacity

 

Swing over bed 1200 mm (47.2") 1400 mm (55.1"")
Swing over cross slide 830 mm (32.6") 1030 mm (40.5")
Swing over gap 1700 mm (66.9") 1900 mm (74.8")
Center height 600 mm (23.6") 700 mm (27.5 ")
Width of gap 600 mm (23.6")
Bed width / Auxiliary guide 800 mm (31.4") / 1000 mm (39.3")
Between centers 2M, 3M, 4M, 5M, 6M, 7M,8M,9M,10M,11M,12M,13M,14M
Headstock Spindle bore,dia. Ø 230 mm (9 ") [Opt. 310 mm (12") , Ø 360 mm (14" ) ,
Ø 535 mm (21") , Ø 762 mm (30")]
Spindle nose A2-15
[Opt. A2-20, A2-28) ]
Spindle speeds (rpm), 12steps 6-400
[Opt. 4-280, 3-200]
Main spindle motor 30HP [Opt. 40HP or 50HP]
Feed & Threads Cross travel 800 mm (31.4")
Cross feeds 0.065-0.96 mm / rev (48 kinds)
Longitudinal feeds 0.13-1.92 mm / rev (48 kinds)
Lead screw diameter 50 mm (1.9") x 2 TPI
Threading range, Metric 2-30 mm / pitch (44 kinds)
Threading range, Inch 1-15 TPI (48 kinds)
Module pitch threads 1-15 M (32 kinds)
DP. Pitch threads 2-30 P (48 kinds)
Compound rest travel 350 mm (13.7")
Tool size 50 x 50 mm (2 x2")
Rapid motor 1/2 HP
Tailstock Quill Diameter Ø 200 mm (7.87") [Opt. Ø 290 mm (11.41") rotating type]
Center taper MT7
Quill travel 300 mm (11.8")
Miscellaneous Coolant pump 1/4 HP
Net Weight, Kgs 14650 (2M), 16550 (3M), 18700 (4M),
21000 (5M), 23300 (6M), 25650 (7M),
28000 (8M), 30700 (9M), 33400 (10M),
36100 (11M), 38800 (12M), 41500 (13M),
44200 (14M)
Model TK 1600N
Capacity Swing over bed 1600 mm (62.9")
Swing over cross slide 1230 mm (48.4")
Swing over gap 2100 mm (82.6")
Center height 800 mm (31.4")
Width of gap 600 mm (23.6")
Bed width / Auxiliary guide 800 mm (31.4") / 1000 mm (39.3")
Between centers 2M, 3M, 4M, 5M, 6M, 7M,8M,9M,10M,11M,12M,13M,14M
Headstock Spindle bore, Dia. Ø 230 mm (9 ") [Opt. 310 mm (12") , Ø 360 mm (14" ) ,
Ø 535 mm (21") , Ø 762 mm (30")]
Spindle nose A2-15
[Opt. A2-20, A2-28) ]
Spindle speeds (rpm), 12steps 6-400
[Opt. 4-280, 3-200]
Main spindle motor 30 HP [Opt. 40HP or 50HP]
Feed & Threads Cross travel 800 mm (31.4")
Cross feeds 0.065-0.96 mm / rev (48 kinds)
Longitudinal feeds

0.13-1.92 mm / rev (48 kinds)

Lead screw diameter 50 mm (1.9") x 2 TPI
Threading range, Metric 2-30 mm / pitch (44 kinds)
Threading range, Inch 1-15 TPI (48 kinds)
Module pitch threads 1-15 M (32 kinds)
DP. Pitch threads 2-30 P (48 kinds)
Compound rest travel 350 mm (13.7")
Tool size 50 x 50 mm (2 x2")
Rapid motor 1/2 HP
Tailstock Quill diameter Ø 200 mm (7.87") [Opt. Ø 290 mm (11.41") rotating type]
Center taper MT 7
Quill travel 300 mm (11.8")
Miscellaneous Coolant pump 1/4 HP
Net Weight, Kgs 14650 (2M), 16550 (3M), 18700 (4M),
21000 (5M), 23300 (6M), 25650 (7M),
28000 (8M), 30700 (9M), 33400 (10M),
36100 (11M), 38800 (12M), 41500 (13M),
44200 (14M)
 

*The Specifications are subject to change without prior notice.

  • Inch/metric dual gear box
  • 4-ways toolpost with T slot
  • Work light
  • Coolant system
  • Thread chasing dial
  • Cross & longitudinal rapid travel
  • Longitudinal bar with travel dogs (for carriage stop)
  • Magnetic brake for main spindle
  • Sleeve & centers
  • Tool box with tools
  • Manual
  • Upgrade spindle bore
  • Upgrade spindle motor
  • Chuck or Face plate
  • Adaptor for rear chuck
  • Front chuck protection cover
  • Rear chuck protection cover
  • 4-position carriage stop
  • Steady rest
  • Follow rest
  • Rear tool post
  • Quick change tool post
  • Boring bar tool holder
  • Rapid threading attachment
  • Auto feed on top slide
  • Copy attachment (stroke 120mm)
  • Taper attachment (±10 degree, stroke 500mm)
  • Rotating center, MT7
  • Full length rear splash guard (BC. 2M-5M)
  • Movable rear splash guard
  • CE mark