CNC Vertical Lathe

Heavy Duty
TKV-760 / 760M / 900 / 900M
CNC Vertical Lathe-TKV-760 / 760M / 900 / 900M
  • Specification
  • Standard Accessories
  • Options
Model TKV-760 TKV-760M TKV-900 TKV-900M
Capacity Max. swing diameter 850 mm (33.4") 950 mm (37.4")
Max. turning diameter 850 mm (33.4") 950 mm (37.4")
Distance from ram to table 925 mm (36.4")
Max. turning height 650 mm (25.5")
Max.workpiece weight 1500 kgs 2000 kgs
Spindle Table diameter
(Manual chuck)
610 mm (24") 800 mm (31.4")
Range of table speed 5 - 700 rpm 5 - 600 rpm
Change gear speed 2 Steps - 2 Steps -
Spindle nose A2 - 11
Driving tool spindle speed - 50 - 2250 rpm - 50 - 2250 rpm
ATC Number of tool station 12
Tool size 25 mm (0.9”), 32 mm (1.2”)
Cross-section of ram 200 x 200 mm
(7.8"x7.8")
220 x 220 mm
(8.6"x8.6")
200 x 200 mm
(7.8"x7.8")
220 x 220 mm
(8.6"x8.6")
Feed Rapid rate (X Axis) 10 M/min
Rapid rate (Z Axis) 10 M/min
Horizontal travel (X Axis) -100 + 650 mm (-3.9"+25.5") -100 + 750 mm (-3.9" +29.5")
Vertical travel (Z Axis) 600 mm (23.6")
Cutting feed fate 0.001 - 500 mm/rev
Feed override 0 - 150 %
Cross - rail travel Fixed
Cross - rail travel Fanuc 0iTF
Motor Spindle motor
(Cont. / 30 min)
18.5 / 22 kw 30 / 37 kw 18.5 / 22 kw 30 / 37 kw
Feed motor ( X / Z aixs) 4 / 4 kw
Driving tool motor - AC 11 / 15 kw - AC 11 / 15 kw
Power requirement 40 KVA 55 KVA 40 KVA 55 KVA
Machine Size Floor space (L x W) 3450 x 3600 mm 3450 x 3600 mm
Max. height 4500 mm 4500 mm
Net. weight 12500 kgs 13500 kgs

*The Specifications are subject to change without prior notice.

  • Spindle orientation
  • Hydraulic 3-jaw solid chuck, cylinder & soft jaw x 1 set (For TKV-760, TKV-900 series)
  • Hydraulic power unit
  • Electric torque limitation
  • Foot switch for hydraulic chuck
  • Automatic lubrication system
  • Coolant system through tool holder to inserts (3 bar)
  • Coolant flushing system with tank
  • Protection door
  • Heat exchanger for electrical cabinet
  • Full enclosed splash guard
  • Work light
  • Warning light ( R / Y / G )
  • Workpiece counter
  • Chain type chip conveyor & chip trolley
  • Manual of operation & maintenance
  • Manual of electrical & hydraulic circuit diagram
  • Manual for controller
  • Tool box with tool kits
  • Leveling bolts & pads
  • Higher power motor
  • Extra hydraulic chuck & cylinder
  • Dual speed gear box for driving tool spindle
  • High & low pressure chucking
  • Table with manual 4-jaw chuck 
  • Hard jaws of hydraulic chuck
  • Manual guide i
  • Hydraulic chuck & cylinder, diameter as spec
  • Linear scale on X/Z axis
  • Lubricant chiller for spindle bearing & gear
  • Special tool holder
  • Higher pressure coolant through turret (6 bar)
  • Tool presetter with cover protection (Turning dia. is reduced)
  • Tool arrangement
  • Tool holder base
  • Air conditioner for electrical cabinet
  • Oil skimmer (Disk type)
  • Scrap type chip conveyor with chip trolley
  • Jig & fixture
  • Turnkey project
  • External power transformer
  • CE mark