Precision Conventional Lathe

High Speed
TK330 / 360
Conventional Lathe-TK330 / 360
  • Specification
  • Standard Accessories
  • Options
Description \ Model TK330 x 600 TK330 x 1000 TK360 x 1000
Swing over bed 330 mm (13") 330 mm (13") 360 mm (14")
Swing over cross slide 195 mm (7.6") 195 mm (7.6") 225 mm (8.7")
Swing over gap   490 mm  (19.2") 520 mm  (20.7")
Distance between centers 600 mm  (24") 1000 mm  (40") 1000 mm  (40")
Bed width 190 mm  7.5")
Number of spindle speeds 9
Range of spindle speeds 82-2000 rpm
Spindle bore 40 mm (1.5")
Spindle nose D1-4 Camlock
Taper of spindle nose MT5
Tailstock quill taper MT3
Tailstock quill travel 100 mm (4")
Cross slide travel 165 mm (6.5")
Compound resr travel 100 mm (4")
Matric threads (30 Numbers) 0.4-7.0 mm PITCH
Inch threads (32 Numbers) 4-56 TPL
Longitudinal feeds 12 Nos. (0.068-0.936 mm/rew) / 16 Nos. (0.0026-0.00638"/rew)
Cross feeds 12 Nos. (0.034-0.468 mm/rew) / 16 Nos. (0.0013-0.00319"/rew)
Net weight 580 kgs 60 kgs 620 kgs
Gross weight 660 kgs 70 kgs 720 kgs
Packing dimensions 1473 x 762 x 1473 mm 1473 x 762 x 1473 mm 1855 x 762 x 1473 mm

*The Specifications are subject to change without prior notice.

  • Gap bed (TK330 x 1000 / TK360 x 1000)
  • 2HP 1PH or 3HP 3PH Main drive motor
  • 6" & 8" Back plate (D1-4)
  • Center sleeve, MT5xMT3 & center
  • 4 way tool post
  • Complete electric control unit
  • Change gears
  • Rapid foot brake
  • 1/8 HP coolant pump equipment
  • Rear splash guard
  • Tool box & tools
  • Steady rest
  • Follow rest
  • Faceplate
  • Rotating center Mt3
  • 3-jaw chuck
  • 4-jaw chuck
  • Taper attachment
  • Quick change tool post
  • Single saddle stop
  • 4 position saddle stop
  • Chuck guard
  • 5C collet closer
  • DRO Equipment
  • Work light