Teach-In CNC Lathe

TNC600 / 660A / 770A / 890A
TNC770A CNC Teach-In Lathes with FAGOR Controller
  • Specification
  • Standard Accessories
  • Options
Model Description TNC600 TNC660A TNC770A TNC890A
Capacity Swing over bed 600 mm (23.6") 660 mm(26”) 770 mm(30.3”) 900 mm(35.4”)
Swing over cross slide 370mm (14.5") 360 mm(14.2”) 470 mm(18.5”) 600 mm(23.6”)
Center height 300 mm (11.8") 330 mm(13”) 385 mm(15”) 450 mm(17.7”)
Distance between center 2000 mm (79"),
3000 mm (118")
1500 mm(60”), 2000 mm(80”), 3000 mm(120”),
4000 mm(157”), 5000 mm (196")
Bed Width  390 mm (15.5") 480mm(18.9”)
Spindle Spindle nose A1-8 or D1-8 A1 - 11 or D1 - 11
Spindle speeds(4 steps) H1: 621-1600 rpm
H2: 241- 620 rpm
L1:  91- 240 rpm
L2:  35- 90 rpm
H1: 541-1200 rpm
H2: 166- 540 rpm
L1:  76- 165 rpm
L2:  25-  75 rpm
Spindle bore 80mm (3.2") 104 mm (4") 104 mm (4")/
155 mm (6")(OPT)
104 mm (4")/
155 mm (6")/
230 mm (9") (OPT)
Chuck size 10"/12"(OPT) 12” / 15" (OPT)
Turret Longitudinal travel (Z axis) 1800mm(70.8"),
2800mm(110")
1305 mm(51.4”), 1800 mm(70.8”), 2800 mm(110.2”),
3800 mm(149.6”), 4800 mm (188.98")
Cross slide travel (X axis) 310mm (12") 400 mm (15.7”)
Cross slide width 220mm (8.6") 280 mm (11”)
Size of toolpost shank 25 x 25 mm (1"x1") 32 x 32 mm (1.3” x 1.3”)
X axis rapid travel 5M / min. (200ipm) 5M / min. (200ipm)
Z axis rapid travel 6M / min. (240ipm) 6M / min. (240ipm)
Tailstock Tailstock diameter 65 mm (2.5") 105 mm(4.1“)
Tailstock travel 150 mm (6") 150 mm(6“)
Tailstock taper MT5 MT6
Motor Spindle motor 15HP 20HP / 25HP (OPT)
Drives(X,Z) AC SERVO AC SERVO
Range of feeds in manual mode 0.01-500 m/rev.
(0.0004-19.68 in/rev.)
0.01~500mm/rev
(0.0004~19.68 in/rev)
Coolant pump motor 1/4 HP 1/4 HP
Machine  weight Machine  weight 4000 kgs,
4900 kgs
5000kgs, 5500kgs,
6500kgs, 7500kgs,
8500 kgs

*The Specifications are subject to change without prior notice.

  • Auto lubrication system
  • Coolant system
  • 4 stations manual toolpost
  • Rear splash guard with two slide front doors
  • RS-232 port
  • Work light
  • Two dead center
  • Leveling bolts & pads
  • Tool box with tools
  • Accuracy test record
  • Operation & service manual
  • Larger spindle motor
  • Bigger spindle bore
  • 3-Jaw chuck (OD)
  • 4-jaw chuck (OD)
  • Hydraulic chuck (OD, Throungh hole)
  • Face plate
  • Steady rest
  • Follow rest
  • Quick change tool post
  • 4 stations electrical turret
  • 8 stations hydraulic turret with direct type disk
  • Rotation center
  • Hydraulic tailstock
  • Chip conveyor
  • Transformer (power supply except 220V)
  • CE mark