Vertical Machining Center

VMC-2150 / 2600 / 3200
Vertical Machining Center-VMC-2150 / 2600 / 3200
  • Specification
  • Standard Accessories
  • Options
Model Description VMC-2150 VMC-2600 VMC-3200
Table Table size 2200 x 1220 mm 2650 x 1220 mm 3250 x 1220 mm
T slots 22 mm x 7 x 160 mm
Max. table load 2500 kgs 3000 kgs 3500 kgs
Travel ranges (X / Y / Z) 2150 / 1100 / 900 mm 2600 / 1100 / 900 mm 3200 / 1100 / 900 mm
Spindle center to column 1136 mm
Spindle nose to table
surface
151 - 1051 mm
Table to floor 875 mm
Spindle Tool shank and pull stud 50 BT / CAT (opt. 40 BT / CAT)
Spindle speed 6000 rpm (opt. 10000 rpm)
Spindle inner diameter 90 mm
Main motor 18.5 / 22 kw (22 / 26 kw)
Axis Servo Motors
X / Y / Z
FANUC / MITSUBISHI 4.8 / 7.4 / 4.8 kw
Toque 30 / 40 / 30 Nm
Feed Rate X / Y / Z Cutting feed rate 1 - 8000 mm/min
Rapid Feed Rate
X / Y / Z
Japanese control 10 / 10 / 10 M / min
European control 15 / 15 / 15 M / min
Minimum setting 0.001 mm
ATC
(Automatic Tool
Changer)
MAG type Arm type
Tool storage Capacity 24 Tools (opt. 32 / 40 Tools)
Max. tool (dia. / length) 250 / 300 mm
Max. tool weight 15 kgs
Tool to tool 10 Sec.
Chip to chip 18 Sec.
Ballscrews on 3 Axes Dia. Pitch 63 / 63 / 63 mm x 10 mm
Precision class C3, 0.008 mm / 300 mm
Coolant & Lubrication Coolant motor power 0.86 kw
Coolant tank capacity 350 L
Coolant motor capacity 20 L / min
Lubrication motor power 25 Watt x 2
Lubrication tank capacity 4 L
Accuracy Positioning ± 5 Micron / 300 mm
Repeatability 3 Micron
Roundness 10 Micron / 300 mm Dia.
Miscellaneous Machine net weight 21000 kgs 22000 kgs 24000 kgs
Power requirement 35 KVA
Air Requirement 7 kg / cm2

*The Specifications are subject to change without prior notice.

  • 24-tools arm type ATC
  • BT #50 spindle & ATC, belt driven headstock
  • Programmable coolant system
  • Automatic lubrication system
  • Spindle air blast system
  • Pre-extension ballscrews
  • Screw chip conveyor rear side of saddle
  • Remote MPG
  • RS-232C
  • Operation status light
  • Work light
  • Tool box & tools
  • Leveling bolts & pads
  • Operation & program manuals
  • Coolant through spindle
  • Coolant through tool holder
  • 32-tools arm type ATC
  • 40-tools arm type ATC
  • BT40 spindle & ATC
  • Automatic tool length measurement